top of page

Central Coast Metal Roofing

fitfast-main-def.jpg

FITFAST® Gutter

fitfast-200x127.jpg

Product Description and Features

FITFAST® gutter suits Queensland's demanding weather, withstanding baking sun and torrential rain.The high face front also conceals the ends of roof sheeting, and is custom cut to length, leaving a neater appearance with fewer joins, which saves you time on site. The FITFAST® gutter also has overflow slots helping to prevent water back up into the eaves.

  • Easy installation

  • Low maintenance

  • Manufactured locally for quick turnaround

  • Range of accessories available

Note

  • Available in Queensland only

  • It is important gutters slope towards the outlets (a minimum gutter fall of 1 in 500 is recommended). Without this slope, 'ponding' may occur, reducing the life of your gutter

  • When installing gutters, remove any metal particles or debris at the end of the day to prevent staining or corrosion

  • Do not install galvanised gutters with a ZINCALUME® steel or COLORBOND® prepainted steel roof. Galvanised gutters are only suitable with galvanised steel roof

  • The protective plastic film should be stripped off immediately on installation

 

Specification

fitfast-schematic-def.jpg

Designing Roof Drainage

Correct design of a roof drainage system is critical to the waterproofing of a building. This is a task that should only be carried out by a suitably qualified trade professional in accordance with the BCA and Australian Standards.

In the design and detailing of a roof drainage system, consideration must be given to a range of factors such as:

  • rainfall intensity

  • roof catchment area

  • gutter size/capacity

  • gutter fall

  • gutter outlets (sumps, rain heads, nozzles)

  • downpipe size, quantity and placement

  • overflow consideration

  • material selection and

  • jointing

Downpipe Design

The downpipe size and spacing should be determined in accordance with AS/NZ3500.3.2:1998 National plumbing and drainage: Part 3.2: Stormwater drainage - Acceptable solutions.

Colour Range

LYSAGHT SHEERLINE® gutters and accessories are available in ZINCALUME® steel, COLORBOND® steel, and COLORBOND® steel high gloss colours. View the COLORBOND® steel colours.


For further information please contact Central Coast Metal Roofing on 02 4322 2377, or via email on our contact page

lysaght logo.jpg

For further information please contact Central Coast Metal Roofing on 02 4322 2377, or via email on our contact page.

bottom of page