top of page

Central Coast Metal Roofing

ogee-main-def.jpg

OGEE® Gutter

ogee-200x127.jpg

Product Description and Features

Finish your roof with the distinctive style of the OGEE® Gutter. OGEE® Gutters are one of the most popular profiles, so there is a complete range of accessories to choose from.

  • Available in long lengths for fast and easy installation

  • Compatible with the NOVALINE® Fascia System

  • Manufactured from light, strong, high tensile ZINCALUME® steel or COLORBOND® steel for up to four times the life of a galvanised gutter

  • Full range of accessories available including corners in matching COLORBOND® steel colours as well as stop ends, brackets and over straps

  • Designed for greater durability, longer life and compatibility with steel and tile roofs

Note

  • Available in SA & VIC. Profile dimensions vary from state to state

  • It is important that gutters slope towards the outlets (a minimum gutter fall of 1 in 500 is recommended). Without this slope, 'ponding' may occur, reducing the life of your gutter

  • When installing gutters, remove any metal particles or debris at the end of the day to prevent staining or corrosion

  • The protective plastic film should be stripped off immediately on installation

  • Ensure selection of suitable material for environmental conditions for maximum durability

​

Specification

Dimensions in SA

A = 64mm (nominal)
B = 98mm (nominal)
C = 145mm (nominal)

Effective Cross Sectional Area: 5242 mm2

Dimensions in VIC & TAS

A = 65mm (nominal)
B = 80mm (nominal)
C = 115mm (nominal)

C79D0219-7174-11D4-98A700508BA5461F.jpg
ogee-components.jpg

Designing Roof Drainage

Correct design of a roof drainage system is critical to the waterproofing of a building. This is a task that should only be carried out by a suitably qualified trade professional in accordance with the BCA and Australian Standards.

In the design and detailing of a roof drainage system, consideration must be given to a range of factors such as:

  • rainfall intensity

  • roof catchment area

  • gutter size/capacity

  • gutter fall

  • gutter outlets (sumps, rain heads, nozzles)

  • downpipe size, quantity and placement

  • overflow consideration

  • material selection and

  • jointing

Downpipe Design

The downpipe size and spacing should be determined in accordance with AS/NZ3500.3.2:1998 National plumbing and drainage: Part 3.2: Stormwater drainage - Acceptable solutions.

Colour Range

LYSAGHT OGEE® gutters and accessories are available in ZINCALUME® steel, COLORBOND® steel, and COLORBOND® steel high gloss colours. View the COLORBOND® steel colours.


For further information please contact Central Coast Metal Roofing on 02 4322 2377, or via email on our contact page

lysaght logo.jpg

For further information please contact Central Coast Metal Roofing on 02 4322 2377, or via email on our contact page.

bottom of page