Central Coast Metal Roofing - MINI ORB®
Product Description and Features
MINI ORB® is a mini-corrugated profile which is suitable for use in interior or exterior applications on straight or curved surfaces. It has the same traditional shape as CUSTOM ORB® but on a much reduced scale. Its subtle profile is a perfect complement to other claddings to provide a "contrasting" surface as an accent feature. It is primarily used for decorative finishes on walls, ceilings and soffit linings; feature walls and partitions; and screens and small awnings not subject to any foot traffic.
Lengths and Tolerance
Sheets are supplied custom cut.
Length: +5mm, -5mm
MINI ORB® may be spring curved down to 1500mm radius. It is suitable for pre-curving - the minimum radius of curve is 150mm, and the minimum straight length after a curve is 50mm. Some possible profiles are shown on the left.
ROOFTRAK® is supplied in kits that include components and fixings. The basic ROOFTRAK® "plank" is 224mm wide. The ROOFTRAK® 450 system uses two planks (total 450mm wide); ROOFTRAK® 675 uses three planks (total 675mm wide). For further details of the kits available.
Is MINI ORB® the same product that has been available for many years?
The product was changed in 1997. The old MINI ORB® product was wider, thicker (thus heavier and more expensive) and manufactured from soft steel. The older product was also limited to a maximum length of 3000mm.
LYSAGHT MINI ORB® is available in the standard range of COLORBOND® steel colours and in unpainted ZINCALUME® steel.
For further information please contact Central Coast Metal Roofing on 02 4322 2377, or via email on our contact page.